This free power station size calculator answers the question “what size power station do I need?” Add the appliances you want to keep running during an outage, set how many hours a day each one runs, and the calculator works out the battery capacity and inverter output you need. Every number is editable, so if your fridge label says something different, change it.
Add what you want to run
| Appliance | Watts | Surge W | Hours/day | Qty | Remove |
|---|
Watts are typical US figures. Check the label on your own appliance and edit any number. Fridges, freezers and AC units only run their compressor part of the time, which the daily total allows for.
Your situation
Your result
Models that fit
Matched on manufacturer specs (capacity and continuous output). Check the surge rating too. We may earn a commission from links; it never changes the maths.
How the calculator works
- Running watts is everything on your list switched on at the same time. Your power station’s continuous AC output needs to beat it, so we add about 20% headroom.
- Peak surge is your running load plus the extra kick of the biggest motor starting (fridge, pump or AC compressor). Check that the power station’s surge rating covers it.
- Energy per day is watts × hours × quantity. Fridges, freezers and AC units only run their compressor part of the time, so we count that share (about 40% for a fridge).
- Recommended capacity adds inverter loss (about 15% by default, as converting battery power to AC wastes some) and a reserve margin, then multiplies by the days you want to cover.
- Solar recharge estimates panel watts × peak sun hours × 75%, because real panels rarely deliver their full label rating.
What this estimate can’t tell you
The appliance figures are typical US values, not measurements of your home. Real usage changes with the weather, the age of the appliance and how often doors are opened. Treat the result as a starting point and round up. The model suggestions are matched on manufacturer specifications (rated capacity and continuous output) and are not a test result.
Anything hard-wired into your home, like a well pump, furnace or sump pump circuit, needs a transfer switch or power inlet installed by a licensed electrician. Never back-feed a power station into a wall outlet.
FAQ: power station size calculator
What size power station do I need?
Add up the watts of everything you want running at the same time (that sets the inverter size), then the watt-hours each item uses per day (watts × hours). Divide the daily total by about 0.85 for inverter losses and add a margin. The calculator above does all of this for you; our what size portable power station do I need guide explains each step.
How accurate is a portable power station size calculator?
It is as accurate as the wattages you enter. The defaults are typical US figures, so check the label on your own appliances and edit the numbers. Treat the result as a starting point and round up to the next size.
How many solar panels do I need to recharge it?
Enter your panel watts and peak sun hours above. The calculator assumes panels deliver about 75% of their label rating, so a 200 W panel in 4.5 peak sun hours adds roughly 675 Wh a day. See how to charge a portable power station with a solar panel.