Independent reviews for US buyers · Reader-supported

Reader-supported: we may earn a commission from brands when you buy through our links, at no extra cost to you. Affiliate Disclosure

Reviews · 2,764.8 Wh

BLUETTI Apex 300 Review: Specs, Runtime & Who Should Buy It

By GridlessLab Editorial · Updated November 17, 2026

Check current price →Opens the retailer’s site. We may earn a commission.

Quick verdict

8.2/10
Rated capacity2,764.8 Wh
AC output3,840 W

A modular 2.76 kWh LiFePO4 home battery with 3,840W output, a claimed 0 ms UPS and a growth path to very large systems. Heavy at about 83.8 lb, and the full system gets expensive.

Figures on this page are manufacturer specifications; we have not measured this unit ourselves.

Overview

BLUETTI’s Apex 300 is a 2,764.8 Wh LiFePO4 unit with a 3,840W inverter, built as the base of a modular home system. BLUETTI says it scales with B300K batteries, and quotes systems up to 100 kWh.

This BLUETTI Apex 300 review is research-based, using BLUETTI’s official product page and our runtime maths. We haven’t tested it ourselves.

Who it’s for

Is the BLUETTI Apex 300 right for you?

  • Buy it if: you want a home backup system you can grow
  • Buy it if: you need seamless switchover for computers
  • Buy it if: you plan solar on a big scale
  • Skip it if: you need portability (about 83.8 lb)
  • Skip it if: you just want overnight fridge backup

Key specs

Rated capacity2,764.8 Wh
Battery chemistryLiFePO4
Rated cycle life6,000+ cycles to 80%
Continuous AC output3,840W
AC outlets4× 20A AC outlets plus a NEMA TT-30R (and more)
Max solar inputUp to 6,400W with the SolarX 4K add-on (2 XT60 ports built in)
UPS / switchover0 ms (BLUETTI claim)
ExpandableYes – B300K batteries; BLUETTI quotes systems up to 100 kWh
Weight83.8 lb
Also worth knowingDesigned for whole-home setups
Manufacturer specifications from the official BLUETTI product page, checked November 2026. Not measured by us.

What stands out

0 ms UPS claim

BLUETTI says the Apex 300 switches with 0 ms interruption, which would make it suitable for computers and network gear.

Outlets

Four 20A AC outlets and a NEMA TT-30R, among others.

Solar

Two built-in XT60 ports, and up to 6,400W in total when you add BLUETTI’s SolarX 4K controller.

Cycle life

6,000+ cycles to 80% original capacity.

How it compares

Here is how the BLUETTI Apex 300 lines up against the models we would cross-shop it with. “Wh per lb” is a quick way to compare how much energy you carry for the weight.

ModelCapacityAC outputWeightWh per lbMax solar
BLUETTI Apex 3002,764.8 Wh3,840W83.8 lb33 Wh/lbUp to 6,400W with the SolarX 4K add-on
EcoFlow DELTA Pro 34,096 Wh4,000W113.5 lb36 Wh/lb2,600W total
Anker SOLIX F3800 Plus3,840 Wh6,000W136.7 lb28 Wh/lb3,200W total
Anker SOLIX F30003,072 Wh3,600W91.5 lb34 Wh/lb2,400W total
PECRON F3000LFP3,072 Wh3,600W63.3 lb49 Wh/lb1,600W max
Manufacturer specifications, checked November 2026.

What the cycle rating means: BLUETTI Apex 300 is rated for 6,000+ cycles to 80%. One full charge and discharge every day would use that up in about 16 years; a full cycle once a week, in about 115 years. In real life most backup units see far fewer full cycles, so calendar ageing, heat and how full you store it matter more. Store it around 50–80% if it will sit for months, and top it up every few months.

Runtime estimates

These are our own estimates, not measurements. We take the rated capacity (2,764.8 Wh), assume about 85% of it reaches your devices after inverter and conversion losses (2,764.8 × 0.85 ≈ 2,350 Wh), then divide by a typical appliance draw. Your appliance’s real wattage is on its label or in its manual, and it changes with settings, temperature and age, so treat these as ballpark figures. Our power station size calculator does the same maths with your own appliance list.

ApplianceTypical drawEstimated runtime on BLUETTI Apex 300
Wi-Fi router + modem20Wabout 118 h
CPAP (no humidifier or heated hose)40Wabout 59 h (humidifier use can double or triple this)
Laptop60Wabout 39 h
Full-size refrigerator (average while cycling)60Wabout 39 h (about 1.4 kWh a day; start-up surge is much higher)
50-inch LED TV100Wabout 24 h
Box fan50Wabout 47 h
5,000 BTU window AC450Wabout 5.2 h (compressor start-up surge)
1/3 hp sump pump (running)800Wabout 2.9 h (start-up surge 2–3× running watts)
Coffee maker1,000Wabout 2.4 h
Space heater (high)1,500Wabout 1.6 h
Formula: rated Wh × 0.85 ÷ appliance watts. Typical draws are common US figures, not measurements of a specific product.

US safety & setup notes

  • Plug devices straight in. Use a heavy-duty extension cord rated for the load if you must run power to another room. Don’t daisy-chain power strips, and keep cords out of walkways.
  • Never backfeed a wall outlet. A “suicide cord” (male-to-male plug) can energize the utility line and kill a line worker. To power hard-wired circuits, have a licensed electrician install a transfer switch or interlock with a power inlet, as the National Electrical Code (NEC) requires for standby and optional standby systems.
  • Indoors is fine; heat is not. Battery power stations make no exhaust, so unlike a gas generator they are safe to run indoors. Keep vents clear, keep it off carpet if it runs hot, and charge it within the temperature range in the manual (most LiFePO4 units will not charge below about 32°F).
  • Medical devices: if someone depends on a CPAP or oxygen concentrator, check the device maker’s guidance for battery and inverter use and keep a second backup plan. A power station is not a substitute for medical advice.

Pros & cons

What we like

  • 3,840W
  • 6,000+ cycles
  • Modular expansion
  • 0 ms UPS (claimed)

What we don’t

  • About 83.8 lb
  • Big solar input needs add-on
  • Warranty term unclear on the page we checked

Alternatives

If the BLUETTI Apex 300 isn’t quite right, these are the models we would look at next:

Verdict

The Apex 300 makes sense as the first block of a larger BLUETTI home system. If you need a single box, compare with the DELTA Pro 3.

Our score: 8.2/10. Strong scalability, cycle life and UPS; marked down for weight and add-on costs. The score is an editorial judgement of value and features against similar models; it is not a lab test result.

Related: Jackery vs BLUETTI.

FAQ: BLUETTI Apex 300 review questions

Is the BLUETTI Apex 300 portable?

It has handles but weighs about 83.8 lb, so think of it as a home unit.

How long will the BLUETTI Apex 300 run a refrigerator?

Roughly 39 h for a typical full-size fridge averaging about 60W while it cycles (2,764.8 Wh × 0.85 ÷ 60W). An older or bigger fridge, a hot kitchen or frequent door opening will cut that. The fridge’s start-up surge also has to fit within the unit’s surge rating; at 3,840W continuous that is rarely a problem for a household fridge.

Can the BLUETTI Apex 300 run a space heater?

Yes, a 1,500W space heater is within its 3,840W rating, but it will only last 1.6 h on high. Heaters are one of the least efficient things to run from a battery; an electric blanket (about 50–100W) keeps you warm for many times longer. See can a portable power station run a space heater.

Can you charge the BLUETTI Apex 300 with solar panels?

Yes. The maker lists solar input as Up to 6,400W with the SolarX 4K add-on (2 XT60 ports built in). Stay inside the voltage window, because exceeding it can damage the unit, and expect real-world panel output well below the panel’s label. Our solar charging guide explains series vs parallel wiring.

Can the BLUETTI Apex 300 be used as a UPS?

The maker lists a switchover time of 0 ms (BLUETTI claim), which is fast enough for most routers, modems, CPAP machines and desktop PCs. It is still not the same as an online (double-conversion) UPS, so test it with your own equipment before relying on it. More in can you use a portable power station as a UPS.

A note on tax credits: the federal 30% Residential Clean Energy Credit (IRC §25D) no longer applies to purchases made after December 31, 2025, and even before that it only covered battery storage of 3 kWh or more installed in connection with your home, which most plug-in portable units never met. Some states and utilities run their own rebates, so check locally. This is general information, not tax advice.

Is the BLUETTI Apex 300 worth it?

It is worth it if you want a home backup system you can grow. Look elsewhere if you need portability (about 83.8 lb). In short: a modular 2.76 kWh LiFePO4 home battery with 3,840W output, a claimed 0 ms UPS and a growth path to very large systems. Heavy at about 83.8 lb, and the full system gets expensive. Prices change often, so check the current price before you buy.

How many amp hours is the BLUETTI Apex 300?

Power stations are rated in watt-hours (Wh), not amp-hours. The BLUETTI Apex 300 stores 2,765 Wh, which works out to about 230 Ah at 12 V (2,765 Wh ÷ 12 V). Compare power stations by Wh: an amp-hour figure only means something next to its voltage.

How we researched this: GridlessLab has not tested this unit hands-on. This review is based on the manufacturer’s published US specifications (checked against the official product page in November 2026) and our own runtime calculations; we did not incorporate third-party test results or owner reports. Where a spec could not be confirmed on the official page, we left it out rather than guess.

GE

GridlessLab Editorial

The GridlessLab editorial team writes research-based guides to portable power stations and solar generators for US homes, RVs and campsites. About GridlessLab & how we work →