The best portable power station for home backup is one sized for the circuits you really need during an outage. We show how to size it, then compare research-based picks.
Home backup is where battery size and output matter most. To keep a fridge, internet, lights and a few phones going through a typical overnight outage, plan on about 2 kWh. To cover a well pump, sump pump or several circuits through a transfer switch, you are into 3–5 kWh units with 120/240V output.
These picks come from verified manufacturer specs and our own calculations; we haven’t tested them hands-on. The approach is simple: list your essentials, size for a realistic outage, and have a way to recharge.
Quick picks
- Best 2 kWh overall: BLUETTI Elite 200 V2
- Best expandable 2 kWh: Anker SOLIX C2000 Gen 2
- Best whole-home 120/240V: EcoFlow DELTA Pro 3
- Most powerful: Anker SOLIX F3800 Plus
- Best value 3 kWh: PECRON F3000LFP
- Best starter 1 kWh: EcoFlow DELTA 3 Plus
| Model | Capacity | AC output | Weight | Fridge runtime* |
|---|---|---|---|---|
| BLUETTI Elite 200 V2 | 2,073.6 Wh | 2,600W | 44.5 lb | 29 h |
| Anker SOLIX C2000 Gen 2 | 2,048 Wh | 2,400W | 41.7 lb | 29 h |
| EcoFlow DELTA Pro 3 | 4,096 Wh | 4,000W | 113.5 lb | 58 h |
| Anker SOLIX F3800 Plus | 3,840 Wh | 6,000W | 136.7 lb | 54 h |
| PECRON F3000LFP | 3,072 Wh | 3,600W | 63.3 lb | 44 h |
| EcoFlow DELTA 3 Plus | 1,024 Wh | 1,800W | 27.6 lb | 15 h |
Size your backup
| Scenario | Energy used | Battery needed (÷ 0.85) |
|---|---|---|
| Fridge (avg 60W) + router (20W) + 4 LED bulbs (40W) for 12 h | 1,440 Wh | ≈1,700 Wh |
| Above + CPAP 40W for 8 h | 1,760 Wh | ≈2,070 Wh |
| Above + 1/3 hp sump pump running 1 h total | 2,560 Wh | ≈3,010 Wh |
Our picks
Best 2 kWh overall: BLUETTI Elite 200 V2
Covers the first two scenarios above with a 2,600W inverter, 6,000+ cycle rating and 5-year warranty.
- 2,073.6 Wh LiFePO4, 2,600W output, 44.5 lb
- Solar input: 1,000W max (12–60V, 20A)
- UPS switchover: ≤15 ms
- Warranty: 5 years
- Estimated fridge runtime: 29 h at 60W (rated Wh × 0.85 ÷ 60W)
Read our full BLUETTI Elite 200 V2 review.
Best expandable 2 kWh: Anker SOLIX C2000 Gen 2
Start at 2 kWh and add a 2,048 Wh BP2000 battery later; 10 ms UPS for internet and a home office.
- 2,048 Wh LFP, 2,400W output, 41.7 lb
- Solar input: 800W max (11–60V)
- UPS switchover: 10 ms
- Estimated fridge runtime: 29 h at 60W (rated Wh × 0.85 ÷ 60W)
Read our full Anker SOLIX C2000 Gen 2 review.
Best whole-home 120/240V: EcoFlow DELTA Pro 3
The L14-30R output lets an electrician connect it to a transfer switch for selected 120V and 240V circuits.
- 4,096 Wh LFP, 4,000W output, 113.5 lb
- Solar input: 2,600W total (1,600W high-voltage 30–150V + 1,000W low-voltage 11–60V)
- UPS switchover: 10 ms
- Warranty: 5 years
- Estimated fridge runtime: 58 h at 60W (rated Wh × 0.85 ÷ 60W)
Read our full EcoFlow DELTA Pro 3 review.
Most powerful: Anker SOLIX F3800 Plus
6,000W at 120/240V and expansion to about 26.9 kWh for long outages.
- 3,840 Wh LFP, 6,000W output, 136.7 lb
- Solar input: 3,200W total (2× 1,600W, 11–165V)
- UPS switchover: 20 ms (UPS outlets)
- Warranty: 5 years
- Estimated fridge runtime: 54 h at 60W (rated Wh × 0.85 ÷ 60W)
Read our full Anker SOLIX F3800 Plus review.
Best value 3 kWh: PECRON F3000LFP
3,072 Wh and 3,600W for less than the big brands, with a 3-year warranty.
- 3,072 Wh LiFePO4, 3,600W output, 63.3 lb
- Solar input: 1,600W max (25–120V, 25A, XT60)
- UPS switchover: Yes (UPS function listed)
- Warranty: 3 years
- Estimated fridge runtime: 44 h at 60W (rated Wh × 0.85 ÷ 60W)
Read our full PECRON F3000LFP review.
Best starter 1 kWh: EcoFlow DELTA 3 Plus
If your budget is tighter, start with an expandable 1 kWh unit and add batteries later.
- 1,024 Wh LiFePO4 (LFP), 1,800W output, 27.6 lb
- Solar input: 1,000W total (2 ports, 11–60V, 500W each)
- UPS switchover: <10 ms
- Warranty: 5 years
- Estimated fridge runtime: 15 h at 60W (rated Wh × 0.85 ÷ 60W)
Read our full EcoFlow DELTA 3 Plus review.
Connecting to your home safely
- Plug devices straight in. Use a heavy-duty extension cord rated for the load if you must run power to another room. Don’t daisy-chain power strips, and keep cords out of walkways.
- Never backfeed a wall outlet. A “suicide cord” (male-to-male plug) can energize the utility line and kill a line worker. To power hard-wired circuits, have a licensed electrician install a transfer switch or interlock with a power inlet, as the National Electrical Code (NEC) requires for standby and optional standby systems.
- Indoors is fine; heat is not. Battery power stations make no exhaust, so unlike a gas generator they are safe to run indoors. Keep vents clear, keep it off carpet if it runs hot, and charge it within the temperature range in the manual (most LiFePO4 units will not charge below about 32°F).
- Medical devices: if someone depends on a CPAP or oxygen concentrator, check the device maker’s guidance for battery and inverter use and keep a second backup plan. A power station is not a substitute for medical advice.
A note on tax credits: the federal 30% Residential Clean Energy Credit (IRC §25D) no longer applies to purchases made after December 31, 2025, and even before that it only covered battery storage of 3 kWh or more installed in connection with your home, which most plug-in portable units never met. Some states and utilities run their own rebates, so check locally. This is general information, not tax advice.
FAQ: Best Portable Power Station for Home Backup
Can a portable power station power a house?
It can power selected circuits through a transfer switch, within its output rating. Central AC, electric ranges and water heaters usually need more than portable units provide.
How long will a power station run a house?
Divide usable Wh by your load. A 2 kWh unit running 120W of essentials lasts about 14 hours (2,048 × 0.85 ÷ 120).
What is the best portable power station for whole home backup?
No portable unit runs a whole house the way a standby generator does. The largest expandable systems, with 6,000 W or more of output and 240 V options, can power essential circuits through a transfer switch or power inlet installed by a licensed electrician. Size for what you actually need, such as the fridge, furnace blower, lights, router and well pump; our power station size calculator adds them up.
How we chose: GridlessLab has not tested these units hands-on. Picks are based on manufacturers’ published US specifications (checked on each official product page in November 2026) and our own runtime calculations, weighed against what this use actually needs. We update the list when specs, models or prices change.