Choosing the best portable power station for CPAP comes down to one number: how many watt-hours your machine uses in a night. Here is how to work it out, then our picks.
A CPAP is one of the best things to run from a portable power station: it draws modest power, runs all night, and you can’t afford for it to stop. The catch is the humidifier and heated hose, which can multiply power use. This guide shows how to size a battery for your machine and which units we would shortlist.
This is general information, not medical advice. Check your CPAP maker’s guidance on battery and inverter use, and talk to your provider if you depend on the device. Our picks are research-based, from verified manufacturer specs; we have not tested them with CPAP machines.
How much power does a CPAP use?
Most modern CPAP machines draw roughly 30–60W with the humidifier off, depending on pressure. Turn on the heated humidifier and heated tube and it can climb above 100W. Your machine’s power supply label shows the maximum, but the real average is usually lower. Here is what that means for runtime:
| Battery size | At 40W (no humidifier) | At 90W (humidifier on) |
|---|---|---|
| 288 Wh | 6.1 h | 2.7 h |
| 499 Wh | 11 h | 4.7 h |
| 1,024 Wh | 22 h | 9.7 h |
| 2,048 Wh | 44 h | 19 h |
Rule of thumb: for two nights without humidification, 500–1,000 Wh is comfortable. With humidification, plan on 1,000 Wh or more per night, or turn the humidifier off during outages.
Quick picks
- Best overall for CPAP: Anker SOLIX C1000 Gen 2
- Best small bedside unit: BLUETTI Elite 30 V2
- Best expandable small unit: EcoFlow RIVER 3 Plus
- Best for camping trips: Goal Zero Yeti 500
- Best with solar: BLUETTI Elite 100 V2
| Model | Capacity | AC output | Weight | CPAP (40W) runtime* |
|---|---|---|---|---|
| Anker SOLIX C1000 Gen 2 | 1,024 Wh | 2,000W | 24.9 lb | 22 h |
| BLUETTI Elite 30 V2 | 288 Wh | 600W | 9.48 lb | 6.1 h |
| EcoFlow RIVER 3 Plus | 286 Wh | 600W | 10.4 lb | 6.1 h |
| Goal Zero Yeti 500 | 499.2 Wh | 500W | 16.1 lb | 11 h |
| BLUETTI Elite 100 V2 | 1,024 Wh | 1,800W | 25 lb | 22 h |
Our picks
Best overall for CPAP: Anker SOLIX C1000 Gen 2
A 1 kWh battery runs most CPAPs for several nights without humidification, or roughly one long night with it. The C1000 Gen 2 adds a sub-10 ms UPS, so you can leave the CPAP plugged into it at the bedside and it will switch over if the power cuts out.
- 1,024 Wh LiFePO4 (LFP), 2,000W output, 24.9 lb
- Solar input: 600W max (11–60V)
- UPS switchover: <10 ms
- Estimated CPAP runtime: 22 h at 40W (rated Wh × 0.85 ÷ 40W)
Read our full Anker SOLIX C1000 Gen 2 review.
Best small bedside unit: BLUETTI Elite 30 V2
At 9.48 lb with a ≤10 ms UPS and 288 Wh, it handles one to two nights without humidification and is easy to keep next to the bed.
- 288 Wh LiFePO4, 600W output, 9.48 lb
- Solar input: 200W max (12–28V)
- UPS switchover: ≤10 ms
- Warranty: 5 years
- Estimated CPAP runtime: 6.1 h at 40W (rated Wh × 0.85 ÷ 40W)
Read our full BLUETTI Elite 30 V2 review.
Best expandable small unit: EcoFlow RIVER 3 Plus
The RIVER 3 Plus is similar in size, also switches in under 10 ms, and can add an extra battery to reach 858 Wh for multi-night trips.
- 286 Wh LFP (LiFePO4), 600W output, 10.4 lb
- Solar input: 220W max (11–55V)
- UPS switchover: <10 ms
- Estimated CPAP runtime: 6.1 h at 40W (rated Wh × 0.85 ÷ 40W)
Read our full EcoFlow RIVER 3 Plus review.
Best for camping trips: Goal Zero Yeti 500
Nearly 500 Wh and a rugged case make the Yeti 500 a good camping CPAP battery; its 12V ports suit DC CPAP cables.
- 499.2 Wh LiFePO4, 500W output, 16.1 lb
- Solar input: 200W max (12.3–28V, 8mm)
- Warranty: 5 years
- Estimated CPAP runtime: 11 h at 40W (rated Wh × 0.85 ÷ 40W)
Read our full Goal Zero Yeti 500 review.
Best with solar: BLUETTI Elite 100 V2
For off-grid camping, 1,000W of solar input means a couple of panels can refill the day’s use quickly.
- 1,024 Wh LiFePO4, 1,800W output, 25 lb
- Solar input: 1,000W max (12–60V, 20A)
- UPS switchover: ≤10 ms
- Warranty: 5 years
- Estimated CPAP runtime: 22 h at 40W (rated Wh × 0.85 ÷ 40W)
Read our full BLUETTI Elite 100 V2 review.
Tips for running a CPAP on battery
- Use the DC cable if your CPAP maker offers one; it avoids inverter losses.
- Turn off the humidifier and heated tube during outages to roughly double runtime.
- Use UPS mode at home so the CPAP keeps running if the power drops overnight.
- Charge the power station fully before storms and check it monthly.
- Keep a second plan (a spare battery or somewhere to go) if the outage is long.
Related guides
FAQ: Best Portable Power Station for CPAP
Can a portable power station run a CPAP all night?
Yes. A 300 Wh unit runs a typical 40W CPAP for about 6 hours without humidification; a 1 kWh unit for about 20 hours.
What size power station do I need for a CPAP?
Multiply your CPAP’s average watts by hours of use and nights, then divide by 0.85. Two 8-hour nights at 40W is 640 Wh ÷ 0.85 ≈ 750 Wh.
Is a UPS needed for CPAP?
Not required, but a fast switchover means the machine keeps running if the grid fails while you sleep.
How do I power my CPAP while camping?
Take a power station sized for at least two nights, run the CPAP from 12 V DC with the maker’s DC cable if one is available, and switch off the heated humidifier, which can use more power than the machine itself. At a 40 W average for 8 hours, a CPAP uses about 320 Wh a night before inverter losses, so a 1 kWh unit covers roughly two to three nights, and a solar panel can top it up during the day.
How we chose: GridlessLab has not tested these units hands-on. Picks are based on manufacturers’ published US specifications (checked on each official product page in November 2026) and our own runtime calculations, weighed against what this use actually needs. We update the list when specs, models or prices change.