Overview
The BLUETTI AC180 is an established 1,152 Wh LiFePO4 power station with an 1,800W inverter, four AC outlets and 1,440W turbo charging (0–80% in about 45 minutes).
We haven’t tested it ourselves. This BLUETTI AC180 review uses BLUETTI’s official product page and our runtime maths. Since newer BLUETTI models such as the Elite 100 V2 arrived, the AC180 is mostly a value buy.
Who it’s for
Is the BLUETTI AC180 right for you?
- Buy it if: you find it at a good discount
- Buy it if: you want slightly more than 1 kWh
- Skip it if: weight matters: at 35.3 lb it is 10 lb heavier than the Elite 100 V2
- Skip it if: you want 1,000W solar
Key specs
| Rated capacity | 1,152 Wh |
| Battery chemistry | LiFePO4 |
| Rated cycle life | 3,500+ cycles |
| Continuous AC output | 1,800W |
| Surge / boost | 2,700W Power Lifting mode (heating loads) |
| AC outlets | 4× 120V AC outlets (1,800W total) |
| USB & DC outputs | 1× USB-C 100W, 4× USB-A, 12V/10A car outlet |
| Max solar input | 500W max (12–60V, 10A) |
| Wall charging | 1,440W Turbo AC charging (0–80% in about 45 min) |
| Expandable | Can be charged from BLUETTI B80 battery (806Wh) |
| Weight | 35.3 lb |
| Warranty | 5 years |
What stands out
Capacity
1,152 Wh, a little more than the 1,024 Wh standard.
Power Lifting
Runs heating devices up to 2,700W at reduced power.
Charging
1,440W turbo AC charging; 500W solar (12–60V).
Weight
About 35.3 lb, heavy for the class.
How it compares
Here is how the BLUETTI AC180 lines up against the models we would cross-shop it with. “Wh per lb” is a quick way to compare how much energy you carry for the weight.
| Model | Capacity | AC output | Weight | Wh per lb | Max solar |
|---|---|---|---|---|---|
| BLUETTI AC180 | 1,152 Wh | 1,800W | 35.3 lb | 33 Wh/lb | 500W max |
| BLUETTI Elite 100 V2 | 1,024 Wh | 1,800W | 25 lb | 41 Wh/lb | 1,000W max |
| Anker SOLIX C1000 Gen 2 | 1,024 Wh | 2,000W | 24.9 lb | 41 Wh/lb | 600W max |
| EcoFlow DELTA 3 Classic | 1,024 Wh | 1,800W | 26.7 lb | 38 Wh/lb | 500W max |
What the cycle rating means: BLUETTI AC180 is rated for 3,500+ cycles. One full charge and discharge every day would use that up in about 10 years; a full cycle once a week, in about 67 years. In real life most backup units see far fewer full cycles, so calendar ageing, heat and how full you store it matter more. Store it around 50–80% if it will sit for months, and top it up every few months.
Runtime estimates
These are our own estimates, not measurements. We take the rated capacity (1,152 Wh), assume about 85% of it reaches your devices after inverter and conversion losses (1,152 × 0.85 ≈ 979 Wh), then divide by a typical appliance draw. Your appliance’s real wattage is on its label or in its manual, and it changes with settings, temperature and age, so treat these as ballpark figures. Our power station size calculator does the same maths with your own appliance list.
| Appliance | Typical draw | Estimated runtime on BLUETTI AC180 |
|---|---|---|
| Wi-Fi router + modem | 20W | about 49 h |
| CPAP (no humidifier or heated hose) | 40W | about 24 h (humidifier use can double or triple this) |
| Laptop | 60W | about 16 h |
| Full-size refrigerator (average while cycling) | 60W | about 16 h (about 1.4 kWh a day; start-up surge is much higher) |
| 50-inch LED TV | 100W | about 9.8 h |
| Box fan | 50W | about 20 h |
| 5,000 BTU window AC | 450W | about 2.2 h (compressor start-up surge) |
| 1/3 hp sump pump (running) | 800W | about 1.2 h (start-up surge 2–3× running watts) |
| Coffee maker | 1,000W | about 60 min |
| Space heater (high) | 1,500W | about 40 min |
US safety & setup notes
- Plug devices straight in. Use a heavy-duty extension cord rated for the load if you must run power to another room. Don’t daisy-chain power strips, and keep cords out of walkways.
- Don’t connect it to your home wiring. At this size it is meant for plug-in devices. Never use a male-to-male cord to feed a wall outlet; it can energize the utility line.
- Indoors is fine; heat is not. Battery power stations make no exhaust, so unlike a gas generator they are safe to run indoors. Keep vents clear, keep it off carpet if it runs hot, and charge it within the temperature range in the manual (most LiFePO4 units will not charge below about 32°F).
- Medical devices: if someone depends on a CPAP or oxygen concentrator, check the device maker’s guidance for battery and inverter use and keep a second backup plan. A power station is not a substitute for medical advice.
Pros & cons
What we like
- 1,152 Wh
- 1,440W turbo charging
- 5-year warranty
- 3,500+ cycles
What we don’t
- 35.3 lb
- 500W solar
- No UPS time listed on the page
Alternatives
If the BLUETTI AC180 isn’t quite right, these are the models we would look at next:
- BLUETTI Elite 100 V2: lighter, 1,000W solar
- Anker SOLIX C1000 Gen 2: 2,000W, 24.9 lb
- EcoFlow DELTA 3 Classic: similar output with 10 ms UPS
Verdict
Fine if the price is right. Otherwise the Elite 100 V2 is the better BLUETTI.
Our score: 7.9/10. Good capacity and charging; heavy versus newer rivals. The score is an editorial judgement of value and features against similar models; it is not a lab test result.
Related: Jackery vs BLUETTI, how long will a portable power station run a refrigerator.
FAQ: BLUETTI AC180 review questions
How long will the AC180 run a CPAP?
About 24 hours at 40W (1,152 × 0.85 ÷ 40), without a humidifier.
How long will the BLUETTI AC180 run a refrigerator?
Roughly 16 h for a typical full-size fridge averaging about 60W while it cycles (1,152 Wh × 0.85 ÷ 60W). An older or bigger fridge, a hot kitchen or frequent door opening will cut that. The fridge’s start-up surge also has to fit within the unit’s surge rating; at 1,800W continuous that is rarely a problem for a household fridge.
Can the BLUETTI AC180 run a space heater?
Yes, a 1,500W space heater is within its 1,800W rating, but it will only last 40 min on high. Heaters are one of the least efficient things to run from a battery; an electric blanket (about 50–100W) keeps you warm for many times longer. See can a portable power station run a space heater.
Can you charge the BLUETTI AC180 with solar panels?
Yes. The maker lists solar input as 500W max (12–60V, 10A). Stay inside the voltage window, because exceeding it can damage the unit, and expect real-world panel output well below the panel’s label. Our solar charging guide explains series vs parallel wiring.
Can the BLUETTI AC180 be used as a UPS?
The official spec page we checked does not list a UPS switchover time, so we can’t confirm it. Many units offer pass-through charging, which is not the same thing: if switchover is slow, a desktop PC may reboot. Test with your own gear first, and see our UPS guide.
Is the BLUETTI AC180 worth it?
It is worth it if you find it at a good discount. Look elsewhere if weight matters: at 35.3 lb it is 10 lb heavier than the Elite 100 V2. In short: a proven 1,152 Wh LiFePO4 unit with 1,800W output and fast charging. Newer models are lighter, so buy it only at a good price. Prices change often, so check the current price before you buy.
How many amp hours is the BLUETTI AC180?
Power stations are rated in watt-hours (Wh), not amp-hours. The BLUETTI AC180 stores 1,152 Wh, which works out to about 96 Ah at 12 V (1,152 Wh ÷ 12 V). Compare power stations by Wh: an amp-hour figure only means something next to its voltage.
How we researched this: GridlessLab has not tested this unit hands-on. This review is based on the manufacturer’s published US specifications (checked against the official product page in November 2026) and our own runtime calculations; we did not incorporate third-party test results or owner reports. Where a spec could not be confirmed on the official page, we left it out rather than guess.